Microwave Assisted Rupture of Furoxans to Nitrile Oxides and Intermolecular Capture by Dipolarophiles

3,4-Diaroylfuroxans 1 react with various dipolarophiles 3 under microwave activation to afford the cycloadduct 4 instead of the expected isoxazole 5 in good yields in the absence of solvent.     

Validated UPLC‐MS/MS method for determination of moclobemide in human brain cell supernatant and its application to bidirectional transport study

A simple and sensitive analytical method based on ultraperformance liquid chromatography–tandem mass spectrometry (UPLC‐MS/MS) has been developed for determination of moclobemide in human brain cell monolayer as an in vitro model of blood–brain barrier. Brucine was employed as the internal standard. Moclobemide and internal standard were extracted from cell supernatant by ethyl acetate after alkalinizing with sodium hydroxide. The UPLC separation was performed on an Acquity UPLC^TM BEH C₁₈ column (50 × 2.1 mm, 1.7 µm, Waters, USA) with a mobile phase consisting of methanol–water (29.5:70.5, v/v); the water in the mobile phase contained 0.05% ammonium acetate and 0.1% formic acid. Detection of the analytes was achieved using positive ion electrospray via multiple reaction monitoring mode. The mass transitions were m/z 269.16 → 182.01 for moclobemide and m/z 395.24 → 324.15 for brucine. The extraction recovery was 83.0–83.4% and the lower limit of quantitation (LLOQ) was 1.0 ng/mL for moclobemide. The method was validated from LLOQ to 1980 ng/mL with a coefficient of determination greater than 0.999. Intra‐ and inter‐day accuracies of the method at three concentrations ranged from 89.1 to 100.9% for moclobemide with precision of 1.1–9.6%. This validated method was successfully applied to bidirectional transport study of moclobemide blood–brain barrier permeability. Copyright © 2013 John Wiley & Sons, Ltd.     

Microstructure and properties of styrene‐butadiene rubber based nanocomposites prepared from an aminosilane modified synthetic lamellar nanofiller

In this work, a novel nanocomposite series based on styrene‐butadiene rubber (SBR latex) and alpha‐zirconium phosphate(α‐ZrP) lamellar nanofillers is successfully prepared. The α‐ZrP lamellar filler is modified at the cation exchange capacity by γ‐aminopropyltrimethoxysilane and the filler surface modification is first discussed. A significant improvement of the mechanical properties is obtained by using the surface modified nanofillers. However, no modification of the gas barrier properties is observed. The impact of addition of bis(triethoxysilylpropyl)tetrasulfide (TESPT) as coupling agent in the system is discussed on the nanofiller dispersion state and on the filler–matrix interfacial bonding. Simultaneous use of modified nanofillers and TESPT coupling agent is found out with extraordinary reinforcing effects on both mechanical and gas barrier properties and the key factors at the origin of the improvement of these properties are identified. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1051–1059     

Macrokinetic study on ozone boundary concentration. Effect of temperature

The process of ozone production in pure oxygen using the tubular, high voltage pulse supplied ozonizer was studied. The unusual methodology of conducting kinetics measurements of the ozone synthesis process was presented. It was shown how the process rate changes along the discharge gap. The effect of power density and gas residence time in the discharge gap on the process rate was analysed. The temperature influence on the course of the process, particularly on the ozone boundary concentration and ozone decomposition rate constant, was discussed.     

Beating oscillation and Fano resonance in the laser assisted electron transmission through graphene δ-function magnetic barriers

We investigate theoretically the transmission of electrons through a pair of δ-function magnetic barriers in graphene in presence of external monochromatic, linearly polarized and CW laser field. The transmission coefficients are calculated in the framework of non-perturbative Floquet theory using the transfer matrix method. It is noted that the usual Fabry–Perot oscillations in transmission through the graphene magnetic barriers with larger inter barrier separation takes the shape of beating oscillations in presence of the external laser field. The laser assisted transmission spectra are also found to exhibit the characteristic Fano resonances (FR) for smaller values of the inter barrier separation. The appearance of the perfect node in the beating oscillation and the asymmetric Fano line shape can be controlled by varying the intensity of the laser field. The above features could provide some useful and potential information about the light - matter interactions and may be utilized in the graphene based optoelectronic device applications.     

Physical aging in amorphous poly(ethylene furanoate): Enthalpic recovery,density, and oxygen transport considerations

The current work utilizes three separate techniques to study the physical aging process in amorphous poly(ethylene furanoate) (PEF), which is a recently introduced engineering thermoplastic with enhanced properties compared to petroleum‐sourced poly(ethylene terephthalate). Differential scanning calorimetry aging experiments were conducted at multiple aging temperatures and times, and the resultant enthalpic recovery values compared to the theoretical maximum enthalpy loss evaluated from calculations involving extrapolation of the equilibrium liquid line. Density measurements reveal densification of the matrix for the aged versus unaged samples, and provide an estimate for the reduction in free volume for the aged samples. Complementary oxygen permeation and pressure‐decay sorption experiments provide independent verification of the free volume reduction mechanism for physical aging in glassy polymers. The current work provides the first detailed aging study for PEF. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 389–399     

Electronic transmission and dwell time on a double barrier system with an accelerating quantum well

Resonant tunneling quantum structures consist of asymmetric wells and barriers have been investigated to find their optimized geometrical parameters and potential profile by the numerical calculations. The results show that the widths and the depths of the asymmetric wells have a significant effect on the transmission coefficient and the dwell time. The properties exhibited in this work may establish guidance to the device applications.     

Ultrasonic emulsification of parenteral valproic acid-loaded nanoemulsion with response surface methodology and evaluation of its stability

Response surface methodology (RSM) was used to optimize the formulation of a nanoemulsion for central delivery following parenteral administration. A mixture of medium-chain triglyceride (MCT) and safflower seed oil (SSO) was determined as a sole phase from the emulsification properties. Similarly, a natural surfactant (lecithin) and non-ionic surfactant (Tween 80) (ratio 1:2) were used in the formulation. A central composite design (CCD) with three-factor at five-levels was used to optimize the processing method of high energy ultrasonicator. Effects of pre-sonication ultrasonic intensity (A), sonication time (B), and temperature (C) were studied on the preparation of nanoemulsion loaded with valproic acid. Influence of the aforementioned specifically the effects of the ultrasonic processing parameters on droplet size and polydispersity index were investigated. From the analysis, it was found that the interaction between ultrasonic intensity and sonication time was the most influential factor on the droplet size of nanoemulsion formulated. Ultrasonic intensity (A) significantly affects the polydispersity index value. With this optimization method, a favorable droplet size of a nanoemulsion with reasonable polydispersity index was able to be formulated within a short sonication time. A valproic acid loaded nanoemulsion can be obtained with 60% power intensity for 15 min at 60 °C. Droplet size of 43.21 ± 0.11 nm with polydispersity index of 0.211 were produced. The drug content was then increased to 1.5%. Stability study of nanoemulsion containing 1.5% of valproic acid had a good stability as there are no significant changes in physicochemical aspects such as droplet size and polydispersity index. With the characteristisation study of pH, viscosity, transmission electron microscope (TEM) and stability assessment study the formulated nanoemulsion has the potential to penetrate blood–brain barrier in the treatment of epilepsy.     

Synthesis and characterization of intrinsic high‐barrier polyimide derived from a novel diamine monomer containing rigid planar moiety

A new diamine monomer containing rigid planar fluorenone moiety, 2,7‐bis(4‐aminophenyl)‐9H‐fluoren‐9‐one, was synthesized through Suzuki coupling reaction. Then it was reacted with pyromellitic dianhydride to obtain a polyimide (FOPPI) via a conventional two‐step polymerization process. The prepared FOPPI exhibits excellent barrier properties, with the oxygen transmission rate and water vapor transmission rate low to 3.2 cm³·m^?2·day^?1 and 2.9 g·m^?2·day^?1, respectively. The results of wide angle X‐ray diffractograms, positron annihilation lifetime spectroscopy, and molecular dynamics simulations reveal that the excellent barrier properties of FOPPI are mainly ascribed to the crystallinity, high chain rigidity, and low free volume, which are resulted from the rigid planar moiety. FOPPI also shows outstanding thermal stability and mechanical properties with a glass transition temperature up to 420 °C, 5% loss temperature of 607 °C, coefficient of thermal expansion of 1.28 ppm K^?1, and tensile strength of 150.8 MPa. The polyimide has an attractive potential application prospect in the flexible electronics encapsulation area. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2373–2382     

Effects of mechanical loadings on the performance of a piezoelectric hetero-junction

A fully-coupled model for a piezoelectric hetero-junction subjected to a pair of stresses is proposed by discarding the depletion layer approximation. The effect of mechanical loadings on PN junction performance is discussed in detail. Numerical examples are carried out for a p-Si/ZnO-n hetero-junction under a pair of stresses acting on the ntype ZnO portion near the PN interface, where ZnO has the piezoelectric property while Si is not. It is found that the bottom of conduction band is lowered/raised near the two loading points due to the decrease/increase in the electron potential energy there induced by a tensile-stress mode via sucking in majority-carriers from two outside regions, which implies appearance of a potential barrier and a potential well near two loading points. Furthermore, the barrier height and well depth gradually become large with increasing tensile stress such that more and more electrons/holes are inhaled in loading region from the n-/p-zone, respectively. Conversely, rising/dropping of conduction band bottom is brought out near the two loading points by a compressive-stress mode due to the increase/decrease in the potential energy of electrons by pumping out the majority-carriers from the loading region to the two outside regions. Therefore, a potential well and a potential barrier are induced near the two loading points, such that more and more electrons/holes are driven away from the loading region to the n-zone/p-zone, respectively, with the increasing compressive stress. These effects are important to tune the carrier recombination rate near the PN interface. Thus, the present study possesses great referential significance to piezotronic devices.